photo pages:  1  2  3  4  5  6  >  >>
< 4 of 321 >
SmugMug > popular > Electronics > Sometimes it is easier to lift the holder into place with you thumb or a finger. Just be sure that there is no backpressure when you push the holder into the catch. Also, don't touch the screen with your fingers or you will get to clean it again. At this point you are done. Put the lens on the camera and enjoy your new screen and clean viewfinder.
SmugMug > popular > Electronics > Hi-Fi photo
SmugMug > popular > Electronics > The front view of the box.
SmugMug > popular > Electronics > Spectral DMC-10 Preamplifier internal shot
SmugMug > popular > Electronics > Passing the baton - a new bird (FZ15) unseats the prior FZ10 (ruler of the roost), metaphorically speaking. Birds in flight were a big stimulus to make the change, so....?
SmugMug > popular > Electronics > Speakers " Popped - Out " for you ! Those four little , square pieces of masking - tape just say " T " + " W " etc. I got a bit dizzy with all the " PLUS " and " MINUS " ends, while connecting the wires from the crossovers to the speakers and to the Terminal Block ! Everything soldered, using my 50' spool of " PG " 12 AWG wire from PE. Ends of wires on the Terminal - Block, however, have round lugs from Radio Shack.
SmugMug > popular > Electronics > sam
SmugMug > popular > Electronics > Getting into the main compartment.
SmugMug > popular > Electronics > Hi-Fi photo
Spectral DMC-10 Preamplifier internal shot
> Spectral DMC-10 Preamplifier internal shot
Spectral DMC-10 Preamplifier internal shot
Photo by: crustyloafer · see photo in gallery
photo pages:  1  2  3  4  5  6  >  >>
< 4 of 321 >

Comments

|

New comment:

Name:
To foil spammers, enter this code: copy this text in this box: Code unreadable?